ePropulsion 48v Charger W communications

Description

Charger

E-Series Battery Charger

Input voltage range: 85V – 265V. Output current: 30A (220V AC input), Approx. 20A (110V AC input). Parallel connection: max 8 units.

E-Series Battery Remote Switch

16.4 ft (5m) long. This remote switch allows you to switch on / off the E-Series battery remotely. It also works as a communication terminator in a parallel connection.

Evo Dual Remote Control

Including a twin-throttle control and a 4.3″ backlit screen display. Docking mode. Sync mode. Magnetic kill switch.

E-Series Battery Communication Terminator

This is a required item for the parallel connection of E-Series batteries. It connects to the CAN-IN port on the master battery.

ePropulsion Charger options

Highly efficient charger for E40, E80, and E175 batteries.

E Battery Charger 20A L

• Max output current (110V): appx. 20A
• Max input current (110V): 12A
• Parallel connection: max 8 units

E Battery Charger 30A H

• Max output current (220V): 30A
  Max input current (220V): 9A
  Parallel connection: max 8 units
• Product No.: EC-0020-11 (110V) / EC-0030-20 (220V)
• Spirit External Battery Cable allows you to connect the Spirit 1.0 Plus motor with a 48V E-Series Battery to extend the range.
• Item number: 00-0601-08
• Warranty: 1 year

This five-meter remote switch allows you to switch on / off the E-Series battery remotely. It’s worked as a communication terminator in parallel connection.

• The remote switch can only be connected to the CAN-IN port on the E-Series battery.
• Item number: EB-AC02-00
• Warranty: 1 year

Price

• Switch           $125
• Charger        $480

• Warranty Claim Procedures – If you find your product defective, you can make a claim to your dealer following below procedures:
  1. Fill in the Warranty Card correctly and completely in advance. Then make your warranty claim by sending it to your authorized ePropulsion service partner together with valid proof of purchase. Usually these documents are required when making a warranty claim: the Warranty Card, ex-factory serial number, and evidence of purchase.
  2. Send the defective product to your authorized ePropulsion service point after getting the confirmation. Note that the label should be kept intact. You can also deliver the product to your authorized ePropulsion dealer after getting confirmation
  3. The defective components or parts will be either repaired or replaced according to the diagnosis made by the ePropulsion authorized service partner.
  4. If your warranty claim is accepted, the equipment will be repaired or replaced free of charge. Note that any delivery cost incurred in the process is at your charge.
  5. After careful examination and confirmation by ePropulsion authorized dealer, the defective or faulty components will be repaired or replaced with brand new ones against the actual condition.
  6. In case your warranty claim be rejected, an estimated repair charge with round trip delivery cost will be sent for confirmation. ePropulsion authorized service point will conduct maintenance accordingly only after your confirmation.

  If warranty expires, you can still enjoy maintenance services from authorized ePropulsion service partners with minimum maintenance charge.

  *Note: Electric Yacht California is NOT an authorized service partner and does not operate an ePropulsion service center.

WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer. Wash hands after handling. For more information, go to www.P65Warnings.ca.gov.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.